<code id="ng627"></code>

  • <code id="ng627"></code>
  • <tr id="ng627"></tr>

    <tr id="ng627"></tr>

      1. <output id="ng627"><track id="ng627"></track></output>
        product thumbnail

        儀表自動讀取系統
        (AMR)

        • Summary
        • Features
        • System Configuration
        • Description
        • AMR Configuration Method
        • Functions
        • Products
        • 下載
        • 客戶支持

        Summary

        The AMR (Automatic Meter Reading System) meters power consumption in the remote user through wire or wireless communication and issues a bill of the power consumption automatically, and enables various system configurations of RF, CDMA, PLC, Handy Terminal method and others depending on the site situation.
        In addition, through the automation of the meter works, the metering cost saving, the improvement of reliability for measured value and the transparent meter working are all supported. It may also be used with the data to establish an energy saving plan by analyzing consumer trends.

        Features

        • - Supports the various communication methods depending on the site situation (RF, CDMA, PLC, Handy Terminal, and others)
        • - Services the power consumption data of each customer with website
        • - Collects data from the various remote meters (electricity, water, gas, heat meter, and others)
        • - Provides variety of information such as Daily/monthly reports, usage trends by graph, etc.
        • - Preserves data during power failures

        System Configuration

        AMR-s1.jpg

        Description

        Description
        AMR ServerThe information relating to the power use of each user is collected to provide the meter reading-related information to the operator for publication in the monthly report
        Web ServerWith Internet, furnishes information on power consumption to anyone using the web browser without any software installation.
        Billing SystemIssues power consumption bills to each user based on data acquired from the AMR server
        FEPCommunicates with the site device and wire or wireless device through various protocols and transmits the data after converting the acquired information to the AMR Server
        Communication device (transmitter)This device collects the information from the electronic meter of each user and converts it into the appropriate protocol for sending to the AMR server
        Electronic gauge meterThis device acquires the power consumption of each user and converts and transmits it as a digital signal.

        AMR Configuration Method

        AMR-s2.jpg

        Functions

        • - Supports the various communication methods depending on the site situation (RF, CDMA, PLC, Handy Terminal, and others)
        • - Services the power consumption data of each customer with website
        • - Collects data from the various remote meters (electricity, water, gas, heat meter, and others)
        • - Provides variety of information such as Daily/monthly reports, usage trends by graph, etc.
        • - Preserves data during power failures

        Customer information management screen

        AMR-s3.gif

        • -Input of detailed information and correction for customer
        • -Power-related information
        • -Customer DB management and search

        Power use graph screen

        AMR-s4.gif

        • -Daily and monthly use
        • -Status of use for peak power
        • - Fare payment, notice issuance, and payment service function
        • - Added value for services by using the meter reading information
        • - AMR equipment resource management function

        Wh report screen

        AMR-s5.gif

        • -Request of monthly billing
        • -Integrated / individual billing issuance

        System operation status screen

        AMR-s6.gif

        • -Status of remote meter reading
        • -Checking on communication condition

        Products

        Model NameLD1210Dr-040LD1210DR-080LD1210DR-120LD3410DR-040LD3410DR-120
        Picture
          [Up/Down]
        AMR-s7.jpgAMR-s8.jpgAMR-s9.jpgAMR-s10.jpgAMR-s11.jpg
        Picture
          [Left/Right]
        AMR-s12.jpgAMR-s13.jpgAMR-s14.jpgAMR-s15.jpgAMR-s16.jpg
        Connection1Phase 2Wire Direct Connection3Phase 4Wire Direct Connection

        LD 1210DR-040

        ModelWiringAccuracyUnit TypeRatingsType
        LDNormal121P2WDRDirect Connection40ASStandard
        343P4W80APPulse Type



        Summary

        The AMR (Automatic Meter Reading System) meters power consumption in the remote user through wire or wireless communication and issues a bill of the power consumption automatically, and enables various system configurations of RF, CDMA, PLC, Handy Terminal method and others depending on the site situation.
        In addition, through the automation of the meter works, the metering cost saving, the improvement of reliability for measured value and the transparent meter working are all supported. It may also be used with the data to establish an energy saving plan by analyzing consumer trends.

        Features

        • - Supports the various communication methods depending on the site situation (RF, CDMA, PLC, Handy Terminal, and others)
        • - Services the power consumption data of each customer with website
        • - Collects data from the various remote meters (electricity, water, gas, heat meter, and others)
        • - Provides variety of information such as Daily/monthly reports, usage trends by graph, etc.
        • - Preserves data during power failures

        System Configuration

        AMR-s1.jpg

        Description

        Description
        AMR ServerThe information relating to the power use of each user is collected to provide the meter reading-related information to the operator for publication in the monthly report
        Web ServerWith Internet, furnishes information on power consumption to anyone using the web browser without any software installation.
        Billing SystemIssues power consumption bills to each user based on data acquired from the AMR server
        FEPCommunicates with the site device and wire or wireless device through various protocols and transmits the data after converting the acquired information to the AMR Server
        Communication device (transmitter)This device collects the information from the electronic meter of each user and converts it into the appropriate protocol for sending to the AMR server
        Electronic gauge meterThis device acquires the power consumption of each user and converts and transmits it as a digital signal.

        AMR Configuration Method

        AMR-s2.jpg

        Functions

        • - Supports the various communication methods depending on the site situation (RF, CDMA, PLC, Handy Terminal, and others)
        • - Services the power consumption data of each customer with website
        • - Collects data from the various remote meters (electricity, water, gas, heat meter, and others)
        • - Provides variety of information such as Daily/monthly reports, usage trends by graph, etc.
        • - Preserves data during power failures

        Customer information management screen

        AMR-s3.gif

        • -Input of detailed information and correction for customer
        • -Power-related information
        • -Customer DB management and search

        Power use graph screen

        AMR-s4.gif

        • -Daily and monthly use
        • -Status of use for peak power
        • - Fare payment, notice issuance, and payment service function
        • - Added value for services by using the meter reading information
        • - AMR equipment resource management function

        Wh report screen

        AMR-s5.gif

        • -Request of monthly billing
        • -Integrated / individual billing issuance

        System operation status screen

        AMR-s6.gif

        • -Status of remote meter reading
        • -Checking on communication condition

        Products

        Model NameLD1210Dr-040LD1210DR-080LD1210DR-120LD3410DR-040LD3410DR-120
        Picture
          [Up/Down]
        AMR-s7.jpgAMR-s8.jpgAMR-s9.jpgAMR-s10.jpgAMR-s11.jpg
        Picture
          [Left/Right]
        AMR-s12.jpgAMR-s13.jpgAMR-s14.jpgAMR-s15.jpgAMR-s16.jpg
        Connection1Phase 2Wire Direct Connection3Phase 4Wire Direct Connection

        LD 1210DR-040

        ModelWiringAccuracyUnit TypeRatingsType
        LDNormal121P2WDRDirect Connection40ASStandard
        343P4W80APPulse Type



        下載

        主題 分類 語言 修改日期

        客戶支持

        常見問題 more
        聯系我們 more
        top